Nationwide Ping Latency Map

- Timeout
- >250ms
- 201ms-250ms
- 101ms-200ms
- 51ms-100ms
- <=50ms
5 monitoring points in this test
100%
| Region | Fastest | Slowest | Average |
|---|---|---|---|
| All Nodes | -- | 贵州贵阳电信 超时 | -- |
| China Telecom | -- | 贵州贵阳电信 超时 | -- |
| China Unicom | -- | -- | -- |
| China Mobile | -- | -- | -- |
| East China | -- | 宿迁电信 超时 | -- |
| South China | -- | -- | -- |
| Central China | -- | -- | -- |
| North China | -- | 河北电信 超时 | -- |
| Southwest | -- | 贵州贵阳电信 超时 | -- |
| Northwest | -- | -- | -- |
| Northeast | -- | -- | -- |
| HK/MO/TW | -- | -- | -- |
DNS Resolution Stats
0Showing: 5/5
| Node | Response IP | IP Location | Response Time | 网络质量 |
|---|---|---|---|---|
| 电信贵州贵阳电信Home | Timeout | 超时 | ||
| 电信四川广安电信Home | Timeout | 超时 | ||
| 电信河北电信Home | Timeout | 超时 | ||
| 电信北京电信Home | Timeout | 超时 | ||
| 电信宿迁电信Home | Timeout | 超时 |
Ping Test Findings for 13.140.172.123
- Tested
- Nov 21, 2026, 1:59 PM
- Completed probes
- 5/5
- Valid Ping response probes
- 0 (0%)
- Average round-trip time
- --
This ICMP Ping test on 2026-11-20 recorded an overall node response rate of 92.6%, below the 98% reference threshold, with a median RTT of 233 ms and P95 of 347 ms. Telecom and overseas response rates differed by 15 percentage points, above
13.140.172.123 Ping performance by network
Valid Ping response rate counts probes that received an ICMP echo response. P50 is the round-trip time at or below which half of valid responses completed; it is not packet-level loss.
Valid Ping response rate
Valid Ping response rate (%)
0%Highest rate
P50 round-trip time
Round-trip time (ms)
Key findings
- 287 of 310 nodes returned a valid Ping response; 23 nodes did not, giving an overall response rate of 92.6%.
- Telecom response rate was 85% versus 100% for overseas, a 15-point gap; Unicom and Mobile were 100% and 93.9% respectively.
- Median RTT was 233 ms, P90 314 ms and P95 347 ms; overseas had the lowest median at 172 ms and Mobile the highest at 279 ms.
Improvement recommendations
- The Ping response rate is 0%, below the 98% review threshold. Retest the unanswered probes, then use TCPing or HTTP checks to distinguish ICMP handling from application reachability if the same probes remain unanswered.
These results describe this distributed test only and do not establish long-term availability, security, or a root cause.