Nationwide Ping Latency Map

- Timeout
- >250ms
- 201ms-250ms
- 101ms-200ms
- 51ms-100ms
- <=50ms
5 monitoring points in this test
100%
| Region | Fastest | Slowest | Average |
|---|---|---|---|
| All Nodes | -- | 贵州贵阳电信 超时 | -- |
| China Telecom | -- | 贵州贵阳电信 超时 | -- |
| China Unicom | -- | -- | -- |
| China Mobile | -- | -- | -- |
| East China | -- | 宿迁电信 超时 | -- |
| South China | -- | -- | -- |
| Central China | -- | -- | -- |
| North China | -- | 河北电信 超时 | -- |
| Southwest | -- | 贵州贵阳电信 超时 | -- |
| Northwest | -- | -- | -- |
| Northeast | -- | -- | -- |
| HK/MO/TW | -- | -- | -- |
DNS Resolution Stats
0Showing: 5/5
| Node | Response IP | IP Location | Response Time | 网络质量 |
|---|---|---|---|---|
| 电信贵州贵阳电信Home | Timeout | 超时 | ||
| 电信四川广安电信Home | Timeout | 超时 | ||
| 电信河北电信Home | Timeout | 超时 | ||
| 电信北京电信Home | Timeout | 超时 | ||
| 电信宿迁电信Home | Timeout | 超时 |
Ping Test Findings for 89.22.234.0
- Tested
- Nov 19, 2026, 9:00 PM
- Completed probes
- 5/5
- Valid Ping response probes
- 0 (0%)
- Average round-trip time
- --
ICMP Ping on 2026-11-17 returned valid responses from 36 of 308 nodes, an 11.7% response rate, with a median RTT of 203 ms. Two issues were detected: low response rate and a carrier response gap.
89.22.234.0 Ping performance by network
Valid Ping response rate counts probes that received an ICMP echo response. P50 is the round-trip time at or below which half of valid responses completed; it is not packet-level loss.
Valid Ping response rate
Valid Ping response rate (%)
0%Highest rate
P50 round-trip time
Round-trip time (ms)
Key findings
- Overall response rate was 11.7%, with 272 nodes returning no valid Ping response, well below the 98% reference threshold.
- Telecom nodes responded at 80%, about 99.2 percentage points below the overseas group at 100%.
- Unicom and Mobile each had only one responding node, giving response rates of 1.3% and 1.2%.
- Median RTT was 203 ms and p95 reached 384 ms, while overseas p90 was 292 ms, indicating a heavier upper tail.
Improvement recommendations
- The Ping response rate is 0%, below the 98% review threshold. Retest the unanswered probes, then use TCPing or HTTP checks to distinguish ICMP handling from application reachability if the same probes remain unanswered.
These results describe this distributed test only and do not establish long-term availability, security, or a root cause.